Chip Tuning Audi RS3
Up to 30% more power for your Audi RS3
The Audi RS3 (2011 → 2018) is listed with 2 generations and 5 engines. For 4 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +62 to +69 hp (GAN GT from 459 EUR, GAN GTL from 279 EUR).
Which Audi RS3 do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Audi RS3 tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +69 hpwith the GAN GT on turbocharged engines
+62 to +69 hp across the Audi RS3 range with the GAN GT or GAN GTL.
- +32 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Audi RS3 engines: +32 to +32 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Audi RS3 chip tuning: engines and generations
Audi RS3 tuning: three versions of one five-cylinder
About 5,400 first-generation RS 3 Sportbacks (8PA) were built, with orders running from 2011 to 2012. That first generation came as a five-door Sportback and nothing else. For Audi RS3 tuning with a tuning box there is one engine to know, the in-line five-cylinder 2.5 TFSI (EA855), in three versions. The 8P version makes 340 hp and 450 Nm, with a seven-speed S tronic and quattro.
The second generation, the 8V, started in 2015 with 367 hp and 465 Nm (code CZGB), still only as a Sportback. After a pause from April 2016 to July 2017 the engine changed to the EA855 evo with 400 hp and 480 Nm (code DAZA). From September 2018 the code is DNWA, with a petrol particulate filter, and production ended in 2020.
Which RS 3 you have
For Audi RS3 2.5 TFSI tuning the engine code settles the version: CEPA is the 8P, CZGB the early 8V, and DAZA and DNWA the 400 hp car. The saloon was added to the 8V range in 2017. The 8V Sportback is coded 8VA and the saloon 8VS.
In the catalogue the 340 hp, 367 hp and 400 hp versions appear separately, each with the GAN GT. All three come with quattro and a seven-speed S tronic.
RS 3 names and years
The English names are the Audi RS 3 Sportback (8PA, 2011–2012) and the RS 3 Sportback and Saloon (8V, 2015–2020). You will see the name written both as RS3 and as RS 3, and the engine described as the five-cylinder 2.5 TFSI. The 8P had no separate facelift during its short production run.
What Audi RS3 owners say about GAN
Hello! I received a Gan box from you today. I installed it. Well, I didn’t think that this box could change something. Initially, when I ordered it, I did not particularly believe in this device. But after I started the engine and came away I simply didn’t recognized my car. it’s like an airplane!!!. I hope my engine…
Audi RS3 chip tuning: questions
RS 3 8V with 367 hp or 400 hp: is it the same module?
Both 8V versions work with the GAN GT, but they start from different figures: 367 hp and 465 Nm against 400 hp and 480 Nm. The 367 hp car is the one built from 2015 to April 2016, and the 400 hp car came after the pause, from July 2017.
What does chip tuning with the GAN GT add to the RS 3 8P 2.5 TFSI with 340 hp?
With the GAN GT the 8P 2.5 TFSI goes from a stock 340 hp and 450 Nm to 409 hp and 538 Nm. These are the stated gains for this engine type, not a dyno reading of your car.
Tuning box or ECU remap for an Audi RS 3?
An ECU remap changes the software inside the control unit, whereas the GAN module works on the sensor signals the unit reads. Checksums, the flash counter and the factory software stay as they were, and the engine keeps its factory protections. Once the module is removed, no traces remain, as nothing is written to the ECU.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.