Chip Tuning BMW X2
Up to 30% more power for your BMW X2
The BMW X2 (2017 →) is listed with 2 generations and 8 engines. For 8 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +34 to +44 hp (GAN GT from 329 EUR, GAN GTL from 219 EUR).
Which BMW X2 do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
BMW X2 tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +44 hpwith the GAN GT on turbocharged engines
+34 to +44 hp across the BMW X2 range with the GAN GT or GAN GTL.
- +102 Nmfor diesels with the GAN GT
Diesels gain mainly torque: +77 to +102 Nm, which you notice when overtaking and towing.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
BMW X2 chip tuning: engines and generations
BMW X2 tuning: mostly the F39
The first BMW X2, the F39, was sold from March 2018 until October 2023, and the U10 followed it. Most of the catalogue covers the F39, while the U10 has a single version, the sDrive20i with 170 hp. The M35i is not in the catalogue. The diesels are B47 engines, with 150 hp and 350 Nm in the 18d and 190 hp and 400 Nm in the 20d.
The petrol engines are the 1.5-litre B38 in the 18i and the 2.0-litre B48 in the 20i. With the GAN GT the 18d moves from 150 hp and 350 Nm to 194 hp and 452 Nm. These are the stated gains for this engine type, not a dyno reading of your car.
BMW X2 chip tuning: questions
Which GAN module fits the BMW X2 U10 sDrive20i?
The U10 sDrive20i has the 1.5-litre three-cylinder B38 with a 48-volt mild hybrid. It works with the GAN GT.
BMW X2 20d tuning: tuning box or ECU remap?
An ECU remap replaces the factory software in the engine control unit, and a tuning box does not. Your manufacturer's warranty is preserved: the ECU software is never changed, and the module can be removed at any time.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.