Chip Tuning BYD F6
2 engines · +17 to +19 hp
BYD F6: 2 engines — 2 petrol. Gains range from +17 to +19 hp, with up to +26 Nm of torque. GAN GA+ from 189 EUR.
All BYD F6 engines: exact gains
STOCK output, output with GAN, gain and price for each module.
| Engine | STOCK → with GAN | Gain | Tuning modules and prices | |
|---|---|---|---|---|
| Petrol · 2 engines | ||||
| 2.4i162 hp / 220 Nm | +19 hp+26 Nm |
GA — 189 EUR · 181 hp GA+ — 189 EUR · 181 hp |
Select → | |
| 2.0i138 hp / 186 Nm | +17 hp+22 Nm |
GA — 189 EUR · 155 hp GA+ — 189 EUR · 155 hp |
Select → | |
Each engine has its own tuning module: GAN GT / GTL or GAN GA / GA+. Prices are per tuning module and include the current discount.
Not sure which engine you have?
Find your engine by the power output in your registration document: each version has its own module calibration.
BYD F6 tuning: what changes
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals. Your manufacturer’s warranty is preserved: the ECU software is never changed, and the module can be removed at any time.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +19 hpbest in this generation
2.4i 162 hp → 181 hp. The other engines gain from +17 hp; see the table for each one.
- up to +30%more power
GAN GT: up to 30%, GAN GTL: up to 25%, GAN GA+: up to 12%.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
BYD F6 chip tuning: questions
Which tuning module do I need for the BYD F6?
All engines in this generation are naturally aspirated, so you need the GAN GA or GAN GA+. Find your engine in the table above: each row shows the module and the price.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.