Chip Tuning BYD S7
2 engines · +32 to +43 hp
BYD S7: 2 engines — 2 petrol. Gains range from +32 to +43 hp, with up to +54 Nm of torque. GAN GTL from 249 EUR, GAN GT from 399 EUR.
All BYD S7 engines: exact gains
STOCK output, output with GAN, gain and price for each module.
| Engine | STOCK → with GAN | Gain | Tuning modules and prices | |
|---|---|---|---|---|
| Petrol · 2 engines | ||||
| 2.0 T204 hp / 255 Nm | +43 hp+54 Nm |
GTL — 249 EUR · 241 hp GT — 399 EUR · 247 hp |
Select → | |
| 1.5 T154 hp / 240 Nm | +32 hp+50 Nm |
GTL — 249 EUR · 182 hp GT — 399 EUR · 186 hp |
Select → | |
Each engine has its own tuning module: GAN GT / GTL or GAN GA / GA+. Prices are per tuning module and include the current discount.
Not sure which engine you have?
Find your engine by the power output in your registration document: each version has its own module calibration.
BYD S7 tuning: what changes
The tuning module sits between the sensors and the engine control unit (ECU) and adjusts their signals. Your manufacturer’s warranty is preserved: the ECU software is never changed, and the module can be removed at any time.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine
- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +43 hpbest in this generation
2.0 T 204 hp → 247 hp. The other engines gain from +32 hp; see the table for each one.
- up to +30%more power
GAN GT: up to 30%, GAN GTL: up to 25%, GAN GA+: up to 12%.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
BYD S7 chip tuning: questions
Which tuning module do I need for the BYD S7?
All engines in this generation are turbocharged, so you need the GAN GT or GAN GTL. Find your engine in the table above: each row shows the module and the price.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.