Chip Tuning Genesis G90
Up to 30% more power for your Genesis G90
The Genesis G90 (2016 →) is listed with 2 generations and 5 engines. For 1 turbo engine, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +63 to +63 hp (GAN GT from 459 EUR, GAN GTL from 279 EUR). For 4 naturally aspirated engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +25 to +34 hp (GAN GA+ from 219 EUR).
Which Genesis G90 do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Genesis G90 tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +63 hpwith the GAN GT on turbocharged engines
+63 to +63 hp across the Genesis G90 range with the GAN GT or GAN GTL.
- +34 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Genesis G90 engines: +25 to +34 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Genesis G90 chip tuning: questions
Does the GAN tuning module work on the Genesis G90?
Yes, but the gain depends on the engine: each version has its own calibration. The generation table shows the stock output, the output with GAN and the gain.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.