Chip Tuning Audi S3
Up to 30% more power for your Audi S3
The Audi S3 (2001 → 2016) is listed with 3 generations and 6 engines. For 5 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +44 to +53 hp (GAN GT from 399 EUR, GAN GTL from 249 EUR). For 1 engine, choose the GAN GA or GAN GA+: the GAN GA+ adds +27 to +27 hp (GAN GA+ from 199 EUR).
Which Audi S3 do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Audi S3 tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +53 hpwith the GAN GT on turbocharged engines
+44 to +53 hp across the Audi S3 range with the GAN GT or GAN GTL.
- +27 hpwith the GAN GA+
Audi S3 engines with the GAN GA and GAN GA+ tuning modules: +27 to +27 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Audi S3 chip tuning: engines and generations
Audi S3 tuning: a different engine behind each code
Which S3 do you have: 8L, 8P or 8V? The engine behind the badge changed with each generation, so for Audi S3 tuning the generation code comes first and the tuning box second. Not every S3 is a 2.0 TFSI: the first-generation 8L has a 1.8 T 20V with port injection, so it is not a TFSI at all. The 8L was a three-door hatchback with quattro and a six-speed manual, built from 1999 to 2003. It made 210 hp until summer 2001 and 225 hp afterwards, and both versions are turbocharged.
8P and 8V: two generations of the 2.0 TFSI
The 8P (2006–2012) has one engine, the EA113 2.0 TFSI with a K04 turbocharger, 265 hp and 350 Nm. It came as a three-door 8P1 and, from 2008, as the five-door Sportback 8PA, always with quattro. The 8V (2013–2020) uses the EA888 Gen 3 2.0 TFSI with 300 hp and 380 Nm.
From May 2016 the facelifted car made 310 hp, and from November 2018 it went back to 300 hp with 400 Nm. The 8V came as a hatchback 8V1, a Sportback 8VA, a saloon 8VS and, from 2014, a cabriolet 8V7.
Engine codes by generation
The 8L used APY and AMK for 210 hp and BAM for 225 hp. The 8P used BHZ before the 2008 facelift and CDLA or CDMA after it. On the 8V the codes are CJXC for 300 hp, CJXG and DJHA for the 310 hp versions, and DNUE for the late 300 hp car. The 8L, 8P and 8V all come with quattro and a Haldex coupling.
Audi S3 chip tuning: questions
How do I tell an S3 8V with 300 hp from one with 310 hp before chip tuning?
The 310 hp version came with the facelift in May 2016, which brought new headlights and bumpers and a seven-speed S tronic. The engine code settles it: CJXC is the early 300 hp car, CJXG and DJHA are the 310 hp versions. From November 2018 to March 2020 the S3 was rated 300 hp again, and in the catalogue the 300 hp and 310 hp versions appear separately, both with the GAN GT.
What does the GAN GT add to the S3 8P 2.0 TFSI with 265 hp?
With the GAN GT the 8P 2.0 TFSI goes from 265 hp and 350 Nm to 310 hp and 410 Nm. These are the stated gains for this engine type, not a dyno reading of your car.
Which module fits the S3 8L 1.8 T 20V?
The 8L engine is a turbo with port injection, and in the catalogue the 1.8 T with 225 hp works with the GAN GA and the GAN GA+. For the GAN GA and GAN GA+ lines the stated gain is up to 12% more power.
Tuning box or ECU remap for an Audi S3?
Unlike an ECU remap, a tuning box does not rewrite the engine software: the GAN module adjusts the engine sensor signals before they reach the ECU. The factory software, checksums and flash counter stay untouched, and the module comes off in about a minute. Once it is removed, no traces remain, because nothing is written to the ECU.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.