Chip Tuning Audi TT
Up to 30% more power for your Audi TT
The Audi TT (2001 →) is listed with 3 generations and 16 engines. For 11 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +33 to +80 hp (GAN GT from 399 EUR, GAN GTL from 249 EUR). For 5 engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +22 to +30 hp (GAN GA+ from 189 EUR).
Which Audi TT do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Audi TT tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +80 hpwith the GAN GT on turbocharged engines
+33 to +80 hp across the Audi TT range with the GAN GT or GAN GTL.
- +30 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Audi TT engines: +22 to +30 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Audi TT chip tuning: engines and generations
Audi TT tuning: the 2.0 TFSI badge hides two engines
The TT 8J uses the 2.0 TFSI name for two different engines, so for Audi TT tuning the badge is not enough: a tuning box is matched to the engine underneath. Until April 2010 it was the EA113 with 200 hp and 280 Nm (BWA, BPY, CCZA). From April 2010 it was the EA888 with the Valvelift system, 211 hp and 350 Nm (CESA, CETA).
Both are turbo engines, but their starting torque differs by 70 Nm. The gain therefore depends on your engine, not on the badge. On the Mk3 (8S) the 2.0 TFSI is rated 230 hp and 370 Nm, and the TTS makes 310 hp.
The rest of the TT range
The 8J also came with a 1.8 TFSI of 160 hp, and with a 2.0 TDI of 170 hp and 350 Nm that was sold only with quattro. The diesel works with the GAN GT. Until 2010 there was also the 3.2 VR6 with 250 hp, a naturally aspirated engine that uses the GAN GA+.
The first TT, the 8N (1998–2006), used the 1.8 T 20V, a turbo with port injection that is not a TFSI. The Mk3 (8S) was built from 2014 to 2023. After the 2018 facelift the range narrowed to petrol engines, among them the 40 TFSI with 197 hp and the 45 TFSI with 245 hp.
TT generations and body codes
In English the generations are called Mk1 (8N, 1998–2006), Mk2 (8J, 2006–2014) and Mk3 (8S, 2014–2023). For Audi TT Mk2 tuning, the 8J coupé is 8J3 and the roadster 8J9, with orders running from April 2006 to March 2014. The Mk3 is Typ FV: FV3 is the coupé and FV9 the roadster.
Audi TT chip tuning: questions
TT 8J with 200 or 211 hp: which one is on your car, and what does each gain?
The engine changed in April 2010, and the facelift with new lights and bumpers followed in May. So the 200 hp car is the earlier one and the 211 hp car the later one. With the GAN GT the 200 hp engine reaches 254 hp and 361 Nm, and the 211 hp engine 275 hp and 445 Nm. These are the stated gains for each engine type, not a dyno reading of your car.
Does chip tuning with the module change anything about EA888 oil consumption or the chain tensioner?
On the TT 8J with an EA888 engine, the timing chain tensioner and oil consumption can be weak points, although both are rare on transverse cars such as the TT. The tensioner was revised, and the Gen 3 engine largely avoids the problem. A tuning box works on sensor signals; it does not repair or replace any engine part, so it will not fix a worn tensioner.
Is there a module for the Audi TTS 8S with 310 hp?
The Mk3 TTS has a 2.0 TFSI with 310 hp and 380 Nm (CJXG). The 310 hp 2.0 TFSI is listed on the Audi TTS 8S page.
Tuning box or ECU remap for an Audi TT?
Unlike an ECU remap, which rewrites the engine software, the GAN module only sits between the engine sensors and the ECU. The factory software, checksums and flash counter stay untouched, and no traces remain once the module is removed. It plugs into the existing connectors, nothing more.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.