Chip Tuning Ford Transit
Up to 30% more power for your Ford Transit
The Ford Transit (2000 →) is listed with 4 generations and 22 engines. For 20 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +22 to +41 hp (GAN GT from 329 EUR, GAN GTL from 219 EUR). For 2 engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +10 to +12 hp (GAN GA+ from 189 EUR).
Which Ford Transit do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Ford Transit tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +41 hpwith the GAN GT on turbocharged engines
+22 to +41 hp across the Ford Transit range with the GAN GT or GAN GTL.
- +12 hpwith the GAN GA+
Ford Transit engines with the GAN GA and GAN GA+ tuning modules: +10 to +12 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Ford Transit chip tuning: engines and generations
Ford Transit tuning: Mk6, Mk7 and Mk8 by engine
Ford Transit tuning with a tuning box goes by the engine, not the body, so the generation only tells you where to look. In Britain the generations are known as the Mk6 for 2000 to 2006, the Mk7 for 2006 to 2014, the Mk8 for 2014 to 2019 and the Mk9 from 2019. In Germany the count is the 5th, 6th and 7th generation instead, the Transit '00, '06 and '14, and the catalogue follows that with the numerals V, VI and VII. The factory codes are V184 and V185 for the Mk6, V347 and V348 for the Mk7 and V363 for the Mk8.
Engines by generation
The Mk7 ran from 2006 to 2013, or to 2014 by the British count; Transit Mk7 tuning covers the front-wheel-drive 2.2 TDCi with 85 to 140 hp and the rear- or all-wheel-drive 2.4 TDCi with 100 to 140 hp, both with the GAN GT. The Mk6 had the 2.0 TDCi with 125 hp from 2002, a common-rail diesel with front-wheel drive. The Mk8 used the 2.2 TDCi with 100, 125 and 155 hp until 2018 and, from 2016, a 2.0 diesel with 105, 130 and 170 hp that became the 2.0 EcoBlue in 2019. The European Mk8 versions, the 2.2 TDCi with 100, 125 and 155 hp and the 2.0 diesel with 105, 130 and 170 hp, are not in the catalogue, so do not take the Mk7 figures as yours.
The small Transit Courier
Transit Courier tuning is about a different van altogether: a small city model built from 2014 to 2023 on the Fiesta platform and unrelated to the big Transit. Its 1.0 EcoBoost with 100 hp and its 1.5 TDCi with 75 and 95 hp work with the GAN GT. The 1.5 TDCi with 100 hp of 2018 to 2023 is not in the catalogue.
Ford Transit chip tuning: questions
Transit 2.2 TDCi tuning: what does the GAN GT add under load?
With the GAN GT the SportVan's 2.2 TDCi goes from 140 hp to 181 hp. These are the stated gains for this engine type, not a dyno reading of your car.
Chip tuning a Transit Mk7: what should I check on the injectors?
Faulty injectors are a known weak point of the early 2.4 TDCi with 140 hp, where they can cost power and trigger limp mode; on the 2.2 TDCi with 115 hp they can cause an unsteady idle. A tuning module does not replace a worn part: have the injectors checked before fitting one.
Ford Transit remapping or a tuning box on a working van?
Unlike remapping, which rewrites the factory software, a tuning box sits between the engine sensors and the ECU and adjusts their signals. The factory software, checksums and flash counter stay untouched, and the engine's factory protections remain active.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.