Chip Tuning Haval H6
Up to 30% more power for your Haval H6
The Haval H6 (2011 →) is listed with 2 generations and 12 engines. For 10 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +32 to +44 hp (GAN GT from 329 EUR, GAN GTL from 219 EUR). For 2 naturally aspirated engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +17 to +19 hp (GAN GA+ from 189 EUR).
Which Haval H6 do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Haval H6 tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +44 hpwith the GAN GT on turbocharged engines
+32 to +44 hp across the Haval H6 range with the GAN GT or GAN GTL.
- +19 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Haval H6 engines: +17 to +19 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Haval H6 chip tuning: engines and generations
Haval H6 tuning: two different cars in Europe
Which H6 do you drive? Haval H6 tuning with a tuning box depends on it, because Europe has had two quite different cars under that name. The Great Wall H6 of 2013 to 2017 had a 2.0 turbo diesel with 143 hp and 310 Nm, and it works with the GAN GA+. The third generation is sold in Germany only as a full hybrid with a system output of 243 hp. The petrol 1.5T and 2.0T in the catalogue belong to H6 versions sold in other markets.
Haval H6 chip tuning: questions
What does the GAN GA+ add to the Great Wall H6 2.0 diesel?
With the GAN GA+ the diesel goes from 143 hp and 310 Nm to 160 hp and 347 Nm. These are the stated gains for this engine type, not a dyno reading of your car.
Remap Haval H6 or tuning box: what stays untouched?
Unlike an ECU remap, which rewrites the factory software, a tuning box sits between the engine sensors and the ECU and adjusts their signals. With the GAN module the factory software, checksums and flash counter stay untouched, and the engine's factory protections remain active.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.