Chip Tuning KIA Cerato
Up to 30% more power for your Kia Cerato
The Kia Cerato (2004 →) is listed with 4 generations and 20 engines. For 4 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +31 to +43 hp (GAN GT from 329 EUR, GAN GTL from 219 EUR). For 16 naturally aspirated engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +13 to +21 hp (GAN GA+ from 189 EUR).
Which Kia Cerato do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Kia Cerato tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +43 hpwith the GAN GT on turbocharged engines
+31 to +43 hp across the Kia Cerato range with the GAN GT or GAN GTL.
- +21 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Kia Cerato engines: +13 to +21 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Kia Cerato chip tuning: engines and generations
Cerato tuning: one European generation
The Kia Cerato lasted three years in Europe: it arrived in April 2004, and the cee'd replaced it in 2007. Cerato tuning with a tuning box therefore concerns the Cerato I (LD), built as a five-door hatchback and a saloon. Until the facelift of 2006 the engines were the 1.6 with 105 hp, the 2.0 CVVT with 143 hp and two diesels, the 1.5 CRDi with 102 hp and the 2.0 CRDi with 113 hp. The facelift brought a 1.6 with 122 hp and the 1.6 CRDi with 116 hp, while the 2.0 CRDi ended in 2006.
The Cerato I engines
The 2.0 CRDi with 113 hp and 245 Nm gains 34 hp and 76 Nm with the GAN GT; the 1.5 CRDi with 102 hp gains 31 hp and 71 Nm, and the 1.6 CRDi with 116 hp gains 35 hp and 76 Nm. The petrol engines are naturally aspirated and use the GAN GA+: the 1.6 with 105 hp gains 13 hp and 17 Nm, the 1.6 with 122 hp gains 15 hp and 19 Nm, and the 2.0 CVVT with 143 hp gains 17 hp and 22 Nm. What counts is the engine of your car, not the model name alone.
Cerato II, III and IV
The Cerato II (TD), III (YD) and IV (BD) were sold as the Forte, K3 or Cerato depending on the market; in Europe the cee'd and, from 2018, the Ceed took their place. The catalogue covers the engines of those cars, such as the 1.6 Gamma with 128 hp and 155 Nm of the Cerato IV and its 2.0 Nu with 149 to 152 hp.
What Kia Cerato owners say about GAN
Very simple installation. A simple and comfortable mobile App. Real increase in power in Dynamic mode. And even in ECO mode, the car runs faster with less fuel consumption. After Gan installation, I immediately tried the Dynamic mode. I got everything what I needed, the response of the acceleration pedal became…
Kia Cerato chip tuning: questions
What does the GAN GT add to the Cerato 2.0 CRDi 113?
A 2.0 CRDi with 113 hp and 245 Nm reaches 147 hp and 321 Nm with the GAN GT. On a turbodiesel such as this one the GAN GT is rated at up to 30% more power. These are the stated gains for this engine type, not a dyno reading of your car.
What replaced the Cerato in Europe?
The cee'd hatchback replaced the Cerato in 2007, and the later Ceed and XCeed continue that line.
Which engines does the catalogue cover for a Kia Cerato from 2015 and for newer cars?
A Kia Cerato of 2015 is the Cerato III (YD), and newer cars belong to the Cerato IV (BD) from 2018. Their petrol engines mostly use the GAN GA+, with gains of 15 to 21 hp, while the 1.6 GT with 204 hp of the Cerato III works with the GAN GT.
Tuning box or ECU remap for a Cerato?
Cerato chip tuning is done in one of two ways: an ECU remap rewrites the factory software in the engine control unit (ECU), while the GAN tuning module adjusts the engine sensor signals. Your manufacturer's warranty is preserved: the ECU software is never changed, and the module can be removed at any time.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.