Chip Tuning KIA Rio
Up to 30% more power for your Kia Rio
The Kia Rio (2005 →) is listed with 4 generations and 18 engines. For 6 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +22 to +33 hp (GAN GT from 329 EUR, GAN GTL from 219 EUR). For 12 naturally aspirated engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +9 to +15 hp (GAN GA+ from 189 EUR).
Which Kia Rio do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Kia Rio tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +33 hpwith the GAN GT on turbocharged engines
+22 to +33 hp across the Kia Rio range with the GAN GT or GAN GTL.
- +15 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Kia Rio engines: +9 to +15 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Kia Rio chip tuning: engines and generations
Kia Rio tuning: petrol or diesel decides the module
The first question in Kia Rio tuning is petrol or diesel: a tuning box adds more to a diesel Rio than to a petrol one, and that decides the module. Two earlier generations matter here: the Rio II (JB, 2005–2011) and the Rio III (UB, 2011–2017). The Rio III came with the 1.2 and 1.4 CVVT petrol engines alongside two diesels, the 1.1 CRDi with 75 hp and the 1.4 CRDi with 90 hp. The Rio IV (YB) of 2017 added the 1.0 T-GDI with 100 or 120 hp; its last diesel, the 1.4 CRDi, remained available only until May 2018.
Diesels work with the GAN GT
The Rio diesels are turbodiesels, so they work with the GAN GT. Kia Rio CRDi tuning covers three engines: the 1.5 CRDi with 110 hp of the Rio II, the three-cylinder 1.1 CRDi with 75 hp and the 1.4 CRDi with 90 hp. The GAN GT adds 33 hp and 71 Nm to the 1.5, 22 hp and 46 Nm to the 1.1 and 27 hp and 66 Nm to the 1.4.
Petrol engines use the GAN GA+
The Rio II petrol engines are naturally aspirated and use the GAN GA+: the 1.4 with 97 hp gains 12 hp and 15 Nm, and the 1.6 CVVT with 112 hp gains 13 hp and 18 Nm. The Rio III 1.4 CVVT with 107 hp also uses the GAN GA+ and gains 13 hp and 16 Nm. The 1.2 CVVT of the same generation gains 10 hp and 15 Nm. On the Rio IV, the 1.4 MPI with 100 hp gains 12 hp and 16 Nm.
Kia Rio chip tuning: questions
Which Rio gains more from a tuning box, the diesel or the petrol?
The diesel: the 1.4 CRDi 90 goes from 90 hp and 220 Nm to 117 hp and 286 Nm with the GAN GT. These are the stated gains for this engine type, not a dyno reading of your car. A petrol Rio uses the GAN GA+ instead, which gives up to 12% more power, or 10 to 13 hp on the engines above. The Rio IV 1.0 T-GDI does not appear separately in the Rio catalogue: the same engine is listed as the 1.0 T-GDI (->08/2020) of the Kia Stonic.
What does the GAN GT add to the three-cylinder 1.1 CRDi?
The 1.1 CRDi is a three-cylinder diesel with 75 hp and 170 Nm. The GAN GT adds 22 hp and 46 Nm.
Does the first Kia Rio (DC) take a tuning box?
The Rio I, sold in Europe from 2000 to 2005, had naturally aspirated petrol engines only, with no diesel or turbo version. With the GAN GA+ its 1.3 with 82 hp gains 10 hp and 14 Nm, and the 1.5 with 98 hp gains 12 hp and 17 Nm.
Tuning box or ECU remap for a Kia Rio?
Kia Rio chiptuning comes in two forms: an ECU remap rewrites the factory software in the engine control unit (ECU), while the GAN tuning module sits between the engine sensors and the ECU and adjusts their signals. With the module the factory software, checksums and flash counter stay untouched. Your manufacturer's warranty is preserved: the ECU software is never changed, and the module can be removed at any time.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.