Chip Tuning Mazda 6
Up to 30% more power for your Mazda 6
The 6 (2002 →) is listed with 3 generations and 30 engines. For 13 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +26 to +52 hp (GAN GT from 329 EUR, GAN GTL from 219 EUR). For 17 engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +14 to +23 hp (GAN GA+ from 189 EUR).
Which 6 do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Mazda 6 tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +52 hpwith the GAN GT on turbocharged engines
+26 to +52 hp across the Mazda 6 range with the GAN GT or GAN GTL.
- +23 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Mazda 6 engines: +14 to +23 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Mazda 6 chip tuning: engines and generations
Mazda 6 tuning: two GJ engines, two modules
Two engines in the same GJ body show what Mazda 6 tuning with a tuning box comes down to: the 2.2 SKYACTIV-D with 150 hp and the 2.0 SKYACTIV-G with 145 hp. The diesel makes 380 Nm and has two-stage turbocharging, while the petrol engine makes 210 Nm. With the GAN GT the diesel reaches 193 hp and 481 Nm, while the petrol engine reaches 162 hp and 235 Nm with the GAN GA+. These are the stated gains for these engine types, not a dyno reading of your car.
So for Mazda 6 chip tuning the same car needs a different module and gets a different gain, depending on the engine. The GJ also came with the 2.0 SKYACTIV-G with 165 hp and the 2.5 SKYACTIV-G with 192 hp, or 194 hp from July 2018. The 2.2 SKYACTIV-D with 175 hp and 420 Nm gave way in July 2018 to a 184 hp version with 445 Nm; the 184 hp version is not in the catalogue.
Diesel is a large share of Mazda6 sales
In Germany diesels made up 37% of Mazda6 registrations in 2003, 51% in 2007 and 50% in 2011. For the GJ the share rose from 50% in 2013 to 60% in 2015 and fell to 26% in 2018. The GG diesel is the 2.0 MZR-CD, with 121, 136 and 143 hp, and the GH adds the 2.2 MZR-CD with 125, 129, 163 and 180 hp, plus a 185 hp version until April 2010.
The GH also had a 2.0 MZR-CD with 140 hp in 2008, a slightly detuned version of the GG engine. The GG and GH diesels work with the GAN GT; choose by output and year.
Petrol engines by generation
The GG had the 1.8 MZR with 120 hp, the 2.0 MZR with 141 hp and then 147 hp from June 2005, and the 2.3 MZR with 166 hp. The Mazda6 MPS, with the 2.3 MZR-DISI Turbo and 260 hp, is also in the catalogue. The GH kept the 1.8 with 120 hp and the 2.0 MZR with 147 hp, and from April 2010 it offered the 2.0 MZR-DISI with 155 hp. These petrol engines work with the GAN GA+. The GG 2.0 MZR with 147 hp is listed on the Mazda6 GH page.
What Mazda 6 owners say about GAN
Very fast post, very easy to install. Like everyone trying out a product like this I was a bit unsure what to expect, as there is a lot of debate online on the effectiveness of the application, or is ecu tuning better. Regards ECU tuning I don't know what the answer is, but regards the GAN unit, I can't say I was very…
Mazda 6 chip tuning: questions
Mazda 6 SKYACTIV-D tuning: which GAN module fits the GJ 150 and 175?
Both the 150 hp and the 175 hp diesel work with the GAN GT. The 150 hp version makes 380 Nm and the 175 hp version 420 Nm, so go by the output of your car.
Are the Mazda6 GH 2.2 MZR-CD 163 and the GG 2.0 MZR-CD 143 covered?
Yes: the 2.2 MZR-CD with 163 hp and 360 Nm is listed at 210 hp and 457 Nm, and the 2.0 MZR-CD with 143 hp and 360 Nm at 173 hp and 440 Nm, each with the GAN GT. The 163 hp version was built from December 2008 to December 2012, and the 143 hp version from June 2005 to August 2007.
Tuning box or ECU remap for a Mazda 6, and what does the fitting involve?
An ECU remap replaces the factory software in the engine control unit, which is a different method from a tuning box. The GAN module sits between the engine sensors and the ECU and adjusts their signals, so the factory software, checksums and flash counter stay untouched. The box connects to the factory plugs and can be removed in about a minute. Your manufacturer's warranty is preserved: the ECU software is never changed, and the module can be removed at any time.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.