Chip Tuning Mazda 3
Up to 30% more power for your Mazda 3
The 3 (2003 →) is listed with 4 generations and 39 engines. For 8 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +27 to +52 hp (GAN GT from 329 EUR, GAN GTL from 219 EUR). For 31 engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +10 to +22 hp (GAN GA+ from 189 EUR).
Which 3 do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Mazda 3 tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +52 hpwith the GAN GT on turbocharged engines
+27 to +52 hp across the Mazda 3 range with the GAN GT or GAN GTL.
- +22 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Mazda 3 engines: +10 to +22 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Mazda 3 chip tuning: engines and generations
Mazda 3 tuning: the module follows the engine
Can you tune a Mazda 3? Yes, with a tuning box, but Mazda 3 tuning starts with the engine: the module follows what is under the bonnet, not the badge. Almost every Mazda3 is a petrol car: in Germany petrol made up 76–89% of BK registrations from 2004 to 2008, 84–87% of the BL, 80–95% of the BM and 97–100% of the BP. For Mazda 3 chip tuning that means the petrol engines: the MZR 1.4, 1.6 and 2.0 in the BK and BL, and the SKYACTIV-G 100, 120 and 165 in the BM. All of them work with the GAN GA+, rated at up to 12% more power.
The 2.0 SKYACTIV-G 165, for example, goes from 165 hp and 210 Nm to 185 hp and 235 Nm. The SKYACTIV-G 100 is a 1.5-litre engine without a turbocharger, and the 120 and 165 are 2.0-litre engines. The BP arrived in 2019 with the 2.0 SKYACTIV-G M Hybrid at 122 hp, and a 150 hp version from 2020. Since June 2024 the 2.5 e-SKYACTIV G with 140 hp has replaced the 2.0; the catalogue lists these mild hybrids by output.
The diesel minority and the MPS
The diesel share is small: 11–24% of registrations in the BK years, 13–16% for the BL, and 20% in 2014 falling to 5% in 2018 for the BM. The BK had the 1.6 MZ-CD with 109 hp and, after the facelift, the 2.0 MZR-CD with 143 hp. The BL offered the 1.6 MZ-CD with 109 hp, then 116 hp from October 2010, and the 2.2 MZR-CD with 150 and 185 hp.
The BM brought the 2.2 SKYACTIV-D 150 with two-stage turbocharging; all these diesels work with the GAN GT. The 1.5 SKYACTIV-D 105 of the BM and the 1.8 SKYACTIV-D of the BP are not in the catalogue. The one turbo petrol is the MPS, with the 2.3 DISI Turbo, 260 hp and 380 Nm, sold alongside the BK from December 2006 and again in the BL.
Generations and body codes
The Mazda3 has four generations: BK (2003–2009), BL (2009–2013), BM and its BN facelift (2013–2019) and BP from 2019. The BM was built as a hatchback and a saloon, and the BP as a hatchback and a fastback.
What Mazda 3 owners say about GAN
Five minute fitting. Immediately obvious performance change (improvement). Improve the documentation/description about how to use the custom/adjustment mode(s).
Very fast post, very easy to install. Like everyone trying out a product like this I was a bit unsure what to expect, as there is a lot of debate online on the effectiveness of the application, or is ecu tuning better. Regards ECU tuning I don't know what the answer is, but regards the GAN unit, I can't say I was very…
Mazda 3 chip tuning: questions
What are the figures for Mazda3 chiptuning on the 2.2 SKYACTIV-D 150?
The BM diesel makes 150 hp and 380 Nm; with the GAN GT it reaches 193 hp and 481 Nm. These are the stated gains for this engine type, not a dyno reading of your car. The BL 2.2 MZR-CD came with 150 hp or 185 hp, and the GAN GT suits both versions, so choose by output and year.
Which GAN module does the Mazda3 MPS use?
The MPS has the 2.3 DISI Turbo with 260 hp and 380 Nm, in the BK from December 2006 and in the BL. In the catalogue the MPS is listed with the GAN GA+ in both generations: 260 hp and 380 Nm become 281 hp and 410 Nm, so choose by generation.
Mazda3 tuning box or ECU remap: what stays untouched?
An ECU remap replaces the factory software in the engine control unit, which is a different method from a tuning box. The GAN module sits between the engine sensors and the ECU and adjusts their signals, so the factory software, checksums and flash counter stay untouched. Your manufacturer's warranty is preserved: the ECU software is never changed, and the module can be removed at any time.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.