Chip Tuning Mini Countryman
Up to 30% more power for your Mini Mini Countryman
The Mini Countryman (2010 →) is listed with 2 generations and 22 engines. For 19 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +26 to +41 hp (GAN GT from 329 EUR, GAN GTL from 219 EUR). For 3 naturally aspirated engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +12 to +15 hp (GAN GA+ from 189 EUR).
Which Mini Countryman do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Mini Mini Countryman tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +41 hpwith the GAN GT on turbocharged engines
+26 to +41 hp across the Mini Mini Countryman range with the GAN GT or GAN GTL.
- +15 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Mini Mini Countryman engines: +12 to +15 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Mini Mini Countryman chip tuning: engines and generations
MINI Countryman tuning: find your code first
The MINI Countryman F60 One with 102 hp has the same engine as the 136 hp Cooper. Both use the B38A15A 1.5 engine, with 180 or 190 Nm in the One and 220 Nm in the Cooper. So MINI Countryman tuning with a tuning box begins with the car's code, R60 or F60, and then the version: One, Cooper, Cooper S, Cooper D, SD, JCW or ALL4.
The F60 One with 102 hp is in the catalogue. The F60 Cooper with 136 hp is not covered separately: its engine appears in the catalogue as the Cooper of the Mini (II).
Countryman F60, 2017 to 2023
The F60 was shown in November 2016, is built by VDL Nedcar in Born, and had a facelift in May 2020. The Cooper S has the B48A20A 2.0 engine with 192 hp and 280 Nm, and 178 hp after the facelift. With the GAN GT the Cooper S reaches 232 hp and 339 Nm. These are the stated gains for this engine type, not a dyno reading of your car.
The Cooper SD 2.0 diesel makes 190 hp, with 400 Nm in 2017 and 360 Nm from 2018; it works with the GAN GT. The F60 One D shares its engine with the One D of the MINI Clubman (F54), and that is where the catalogue covers it. There is no separate F60 Cooper D with 150 hp in the catalogue: its engine is covered as the 18d of the BMW X1 (F48). The third-generation U25 is not in the catalogue.
Countryman R60, 2010 to 2016
The R60 was the first five-door MINI, shown in Geneva in March 2010 and sold from September 2010, with a facelift in July 2014. The Cooper S 1.6 Turbo (N18B16A) made 184 hp until 2014 and 190 hp afterwards, with 240 Nm. The John Cooper Works makes 218 hp and 280 Nm from 2012 to 2016.
The diesels are the One D with 90 hp, the Cooper D with 111 hp and the Cooper SD 2.0 with 143 hp and 305 Nm. The One with 98 hp and the Cooper with 122 hp use the naturally aspirated N16 engine.
Mini Countryman chip tuning: questions
Countryman Cooper S R60 tuning: 184 or 190 hp, and the JCW?
Go by date: 184 hp up to 2014, 190 hp from the July 2014 facelift; the JCW has 218 hp. All of them are matched to the GAN GT, the module for turbo engines, rated at up to 30% more power.
MINI Countryman Cooper SD chip tuning: 143 hp R60 or 190 hp F60?
The R60 Cooper SD has the 2.0 N47 diesel with 143 hp and 305 Nm, and the F60 Cooper SD has 190 hp and 400 Nm. Go by the code of your car: the GAN GT suits both, but with different figures.
R60 Countryman chiptuning for the One and the Cooper: what does the GAN GA+ line offer?
The One with 98 hp and the Cooper with 122 hp work with the GAN GA+, which is rated at up to 12% more power. The GAN GA+ is also rated at up to 15% lower fuel consumption with an economical driving style.
Tuning box or ECU remap for a Countryman?
Unlike an ECU remap, which rewrites the factory software, a tuning box sits between the engine sensors and the ECU and adjusts their signals. The module comes off in about a minute, and once it is removed no traces remain. Your manufacturer's warranty is preserved: the ECU software is never changed, and the module can be removed at any time.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.