Chip Tuning Seat Ibiza
Up to 30% more power for your Seat Ibiza
The Seat Ibiza (2002 →) is listed with 4 generations and 57 engines. For 33 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +15 to +51 hp (GAN GT from 329 EUR, GAN GTL from 219 EUR). For 24 engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +6 to +19 hp (GAN GA+ from 189 EUR).
Which Seat Ibiza do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Seat Ibiza tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +51 hpwith the GAN GT on turbocharged engines
+15 to +51 hp across the Seat Ibiza range with the GAN GT or GAN GTL.
- +18 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Seat Ibiza engines: +6 to +18 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Seat Ibiza chip tuning: engines and generations
Seat Ibiza tuning: 6P is not a separate generation
Ibiza generations go by codes, and one code misleads: the 6P is not a generation of its own. It is the code of the second facelift of the Ibiza IV (6J), launched in mid-2015 and built until 2017. A tuning box is matched to the engine, so the codes that count are 6L, 6J, 6P and 6F.
The 6L (Mk3) was built from 2002 to 2008, the 6J (Mk4) from 2008 and the 6F (Mk5) from 2017. In May 2015 the EA111 1.2 TSI gave way to the 1.0 Eco TSI and the EA211 1.2 TSI 90. In July 2015 the 1.4 TDI common rail replaced the 1.2 TDI and the 1.6 TDI.
6J petrol and diesel engines
The 6J covers the five-door hatchback and the three-door SC from June 2008 and the ST estate from July 2010. Its petrol range runs from the naturally aspirated 1.2 12V, 1.4 16V and 1.6 16V to the turbo 1.2 TSI with 86 or 105 hp. The 1.4 TSI FR has 150 hp and combines a supercharger with a turbo, while the 1.4 TSI ACT has 140 hp.
The turbo petrol engines work with the GAN GT and the naturally aspirated ones with the GAN GA+. The diesels are the 1.2 TDI CR 75, the 1.6 TDI common rail with 90 or 105 hp, and the pump-injector 1.4 TDI 80 and 1.9 TDI 90 and 105. Every one of them is a turbo diesel.
The 6L and the 6F
The 6L has no TSI engines: its turbo petrol engine is the 1.8 T 20V, with 150 hp in the FR and 180 hp in the Cupra. The 6L diesels are turbocharged, apart from the naturally aspirated 1.9 SDI 64, and run up to the 1.9 TDI with 130 hp in the FR and 160 hp in the Cupra. The 6F is a five-door hatchback only, and the catalogue covers its naturally aspirated 1.0 MPI engines with 65 and 75 hp. Its diesel was short-lived: the 1.6 TDI with 115 hp was built from January 2018 to April 2019.
Seat Ibiza chip tuning: questions
What does the GAN GT add to an Ibiza 6J 1.2 TSI 105 and a 6P 1.0 TSI 95?
In the catalogue the 6J 1.2 TSI goes from 105 hp and 175 Nm to 125 hp and 228 Nm. The 6P 1.0 TSI goes from 95 hp and 160 Nm to 124 hp and 208 Nm. These are the stated gains for this engine type, not a dyno reading of your car. For turbo engines GAN states up to 30% more power.
Seat Ibiza FR TDI chiptuning: which FR and Cupra versions are there?
The 6L FR came as the 1.8 T with 150 hp or the 1.9 TDI with 130 hp; the 6L Cupra as the 1.8 T with 180 hp or the 1.9 TDI with 160 hp. On the 6J the FR came as the 1.4 TSI with 150 hp or the 2.0 TDI CR with 143 hp, while the Cupra is petrol only: the 1.4 TSI with 179 hp. The 6P Cupra is the 1.8 TSI with 192 hp.
Why does the gain differ between the pump-injector TDI and the common rail TDI?
In the catalogue the pump-injector 1.4 TDI and 1.9 TDI are matched to the GAN GA+, for which GAN states up to 12%. The common rail 1.6 TDI works with the GAN GT, rated at up to 30% more power.
Seat Ibiza remap or tuning box: what is the difference?
A remap rewrites the program in the engine control unit; the GAN tuning box works differently. The module leaves that program alone: it adjusts the engine sensor signals, and the factory software, checksums and flash counter stay untouched. Your manufacturer's warranty is preserved: the ECU software is never changed, and the module can be removed at any time.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.