Chip Tuning Toyota Land Cruiser Prado
Up to 30% more power for your Toyota Land Cruiser Prado
The Toyota Land Cruiser Prado is listed with 3 generations and 22 engines. For 5 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +34 to +40 hp (GAN GT from 399 EUR, GAN GTL from 249 EUR). For 17 naturally aspirated engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +11 to +30 hp (GAN GA+ from 189 EUR).
Which Toyota Land Cruiser Prado do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Toyota Land Cruiser Prado tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +40 hpwith the GAN GT on turbocharged engines
+34 to +40 hp across the Toyota Land Cruiser Prado range with the GAN GT or GAN GTL.
- +30 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Toyota Land Cruiser Prado engines: +11 to +30 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Toyota Land Cruiser Prado chip tuning: engines and generations
Land Cruiser Prado tuning: the same car under a series number
Land Cruiser Prado tuning starts with the name: in Germany the J150 is simply the Toyota Land Cruiser, while Prado is its name in markets such as Australia and Asia. The codes are Land Cruiser 90 (J90), Land Cruiser 120 (J120) and Land Cruiser 150 (J150). The catalogue uses Prado for the same cars, so you choose the tuning box by series and year, not by name.
The J90 ran from 1996 to 2002, the J120 from 2002 to 2009 and the J150 from December 2009. The J120 body codes are J120 and J125, and the car came with three or five doors.
J90 and J120: V6 petrol and the 3.0 D-4D
The J90 3.4 V6 with 178 hp works with the GAN GA+. The J120 diesel is the 3.0 D-4D (1KD-FTV) with 163 hp, later 173 and 177 hp. The V6 petrol engines are the 3.4 with 185 hp and the 4.0 (1GR-FE) with 249 hp. In the catalogue these J120 engines are matched to the GAN GA+.
J150: diesel only in Germany
In Germany the J150 is diesel only: the 3.0 D-4D with 173 hp, 190 hp from January 2011, then the 2.8 D-4D with 177 hp from August 2015 and 204 hp from October 2020. The 173, 190 and 177 hp versions work with the GAN GT. The 204 hp version is not in the catalogue.
The 2.8 D-4D with 177 hp is rated at 450 Nm with the automatic gearbox and 420 Nm with the manual. The J150 was facelifted in 2013, 2014, August 2015, 2018 and August 2022, and the 2.8 diesel arrived with the August 2015 facelift.
Toyota Land Cruiser Prado chip tuning: questions
How much more power does Land Cruiser 150 tuning give on the 3.0 D-4D?
Choose the 173 hp version for cars built from December 2009 to December 2010 and the 190 hp version from January 2011 to August 2015. The 173 hp car goes to 209 hp and the 190 hp car to 230 hp. The GAN GT is rated at up to 30% more power, and these are the stated gains for this engine type, not a dyno reading of your car.
Is the 2.8 D-4D from 2015 treated separately from the 3.0 D-4D?
Yes, the 2.8 D-4D (1GD-FTV) with 177 hp has its own GAN GT figures and appears as the 2.8 1GD-FTV; the build date decides, with the 3.0 before August 2015 and the 2.8 after it. The 177 hp and 450 Nm version goes to 214 hp and 545 Nm. The module does not reprogram the gearbox.
What does the GAN GA+ give on the Land Cruiser 3.4 and 4.0 V6?
The 3.4 V6 of the J90 and J120 and the 4.0 V6 of the J120 work with the GAN GA+, which means up to 12% more power.
Does Toyota Land Cruiser chip tuning use the same figures as the Prado?
For the diesels, yes, because Prado is just another name for the same car; the petrol 2.7 and 4.0 V6 of the J150, however, were not sold in Germany.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.