Chip Tuning Toyota Mark
Up to 12% more power for your Toyota Mark
The Toyota Mark is listed with 2 generations and 9 engines. For 9 engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +19 to +26 hp (GAN GA+ from 189 EUR).
Which Toyota Mark do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Toyota Mark tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. Your manufacturer’s warranty is preserved: the ECU software is never changed, and the module can be removed at any time.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +26 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Toyota Mark engines: +19 to +26 hp.
- up to +30%more power
GAN GT: up to 30%, GAN GTL: up to 25%, GAN GA+: up to 12%.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Toyota Mark chip tuning: engines and generations
Toyota Mark X tuning: Mark II, Mark X and the Cressida
1JZ-GTE tuning starts with the Mark II Tourer V, whose turbocharged 2.5-litre engine makes 280 hp and 378 Nm. Toyota Mark II tuning means the Japanese X90, X100 and X110 generations of 1992 to 2004, none of which came to Europe. Toyota Mark X tuning with a tuning box works the same way.
The Mark X, built since 2004, is a rear-wheel-drive V6 saloon that Toyota never offered in Europe, so chip tuning for it begins with the Japanese engine range. Toyota Cressida tuning is about an older car: Cressida was the export name of the early Mark II. The Tourer V is the sporty Mark II of the X100 and X110.
Engines by code
Mark X 2.5 tuning depends on the year, because the 4GR-FSE makes 215 hp in the X120 and 203 hp in the X130. The 3.0-litre 3GR-FSE makes 256 hp; a supercharged version with 320 hp was built from 2006 to 2009. The X130's 3.5-litre 2GR-FSE makes about 318 hp. For the Mark II the catalogue adds the 2.0-litre 1G-FE with 160 hp and the 2.5-litre 1JZ-GE with 200 hp.
So the saloon versions run 203, 212, 215 and 256 hp for the Mark X and 160, 200 and 280 hp for the Mark II. The 2.4-litre version with 163 hp and the 3.5-litre version with 280 hp belong to the Mark X ZiO minivan, not to the saloon. All three, 4GR-FSE, 3GR-FSE and 2GR-FSE, are direct-injection V6 engines. Badges such as 250G, 350S and Tourer V are version names, not engine names.
Toyota Mark chip tuning: questions
What does the GAN GA+ add to the Mark II Tourer V 1JZ-GTE?
The catalogue gives 280 hp and 378 Nm stock and 302 hp and 408 Nm with the GAN GA+. The engine works with both the GAN GA+ and the GAN GA, which are rated at up to 12% more power. These are the stated gains for this engine type, not a dyno reading of your car.
Do the 250G and 350S badges tell me the engine?
No, they are version names, not engine codes. On the saloon the codes are 4GR-FSE for the 2.5, 3GR-FSE for the 3.0 and 2GR-FSE for the 3.5, so find the code before you choose a version.
Which GAN module fits the Mark X 3.0?
The 3.0-litre 3GR-FSE with 256 hp and 314 Nm reaches 276 hp and 339 Nm with the GAN GA+.
Is the Toyota Cressida the same car as the Mark II?
The Cressida was the export name of the Mark II generations X30 to X60, sold in Europe from December 1976. European Cressidas came with petrol engines of 99 to 105 hp or a 66 hp diesel, and these engines are not in the catalogue.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.