Chip Tuning Fiat Panda
Up to 30% more power for your Fiat Panda
The Fiat Panda (2003 →) is listed with 3 generations and 12 engines. For 8 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +21 to +29 hp (GAN GT from 329 EUR, GAN GTL from 219 EUR). For 4 naturally aspirated engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +6 to +12 hp (GAN GA+ from 189 EUR).
Which Fiat Panda do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Fiat Panda tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +29 hpwith the GAN GT on turbocharged engines
+21 to +29 hp across the Fiat Panda range with the GAN GT or GAN GTL.
- +12 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Fiat Panda engines: +6 to +12 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Fiat Panda chip tuning: engines and generations
Fiat Panda tuning starts with the TwinAir
The Panda III has used the 0.9 TwinAir since 2011: a two-cylinder turbo with 85 hp and 145 Nm. A tuning box is matched to the engine, and the TwinAir comes in three versions for the GAN GT: 78, 86 and 90 hp. The 86 hp version covers the standard 85 hp car; tuned with the GAN GT, that TwinAir reaches 112 hp and 174 Nm.
These are the stated gains for this engine type, not a dyno reading of your car. The 78 hp figure applies to the Dualogic car. The 90 hp version is the 4x4 and Cross built from 2014 to 2018.
Three generations, three engine ranges
The first Panda (Typ 141) was built from 1980 to 2003 and ended with the 1.1 FIRE petrol engine. The Panda II appeared in September 2003 with 1.1 and 1.2 FIRE petrol engines and a 1.3 Multijet diesel. That diesel is a detuned version of the 1.3 Multijet that makes 90 hp in the Grande Punto; in the Panda II it makes 69 to 75 hp. The Panda III followed in December 2011 with the TwinAir, and the new 1.3 Multijet came in February 2012.
This 1.3 Multijet makes 75 hp until 2015, and 95 hp in the 4x4 and Trekking. The 1.2 FIRE with 69 hp stayed in the range until 2020. Diesels are about 6% of German Panda registrations. So chip tuning for a Panda comes down to generation, engine and year.
What Fiat Panda owners say about GAN
Just installed on my 2019 Panda 4x4 Twin air with 132kms on the clock ..Feels like the two little gerbils under the hood had a cocktail of caffeine,creatine and CBD. More response and awake, significantly more grunt / torque and yet happier ,healthier and relaxed when not pushing it. Gears are now a joy as opposed to…
Fiat Panda chip tuning: questions
Panda TwinAir 78, 85 or 90 hp: which one is mine?
Choose by version: 78 hp is the Dualogic car, 85 hp is the standard TwinAir and 90 hp is the 4x4 and Cross. With the GAN GT they reach 101 hp and 160 Nm, 112 hp and 174 Nm, and 117 hp and 189 Nm respectively. All three work with the GAN GT for turbo engines, rated at up to 30% more power.
Panda 1.3 Multijet chip tuning: 69, 75 or 95 hp?
The Panda II diesel makes 69 or 75 hp, and the 75 hp version has a particulate filter from 2006. The Panda III diesel is the 75 hp car up to 2015, or the 95 hp 4x4 and Trekking. All of them work with the GAN GT: 69 and 75 hp for the Panda II, 75 and 95 hp for the Panda III.
Chiptuning a Panda 1.1 or 1.2 FIRE: what does the GAN GA+ offer?
The 1.1 and both 1.2 FIRE petrol engines work with the GAN GA+, rated at up to 12% more power. For these engines GAN also states up to 15% lower fuel consumption with an economical driving style.
Tuning box or ECU remap for a Panda?
Unlike an ECU remap, which rewrites the factory software, a tuning box sits between the engine sensors and the ECU and adjusts their signals. The module comes off in about a minute, and once it is removed no traces remain. Your manufacturer's warranty is preserved: the ECU software is never changed, and the module can be removed at any time.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.