Chip Tuning Fiat Tipo
Up to 30% more power for your Fiat Tipo
The Fiat Tipo (2015 →) is listed with 3 generations and 7 engines. For 3 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +29 to +36 hp (GAN GT from 329 EUR, GAN GTL from 219 EUR). For 4 naturally aspirated engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +11 to +13 hp (GAN GA+ from 189 EUR).
Which Fiat Tipo do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Fiat Tipo tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +36 hpwith the GAN GT on turbocharged engines
+29 to +36 hp across the Fiat Tipo range with the GAN GT or GAN GTL.
- +13 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Fiat Tipo engines: +11 to +13 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Fiat Tipo chip tuning: engines and generations
Fiat Tipo tuning: before or after the 2020 facelift
The Fiat Tipo facelift of November 2020 changed the engine range, so Tipo tuning with a tuning box depends on the year of your car. The Tipo (Typ 356) arrived in central and western Europe as a saloon in February 2016; the hatchback followed in May and the estate in September. The five engines in the catalogue cover that original range: two diesels, one turbo petrol and two other petrol engines. More than 1.4 million Tipo and Egea cars had been built by 2026. Engine and year decide which version is yours.
Engines from 2016 to 2020
The 1.4 T-Jet joined the range in May 2016 with 120 hp and 215 Nm. Tuned with the GAN GT, the T-Jet reaches 155 hp and 277 Nm. These are the stated gains for this engine type, not a dyno reading of your car.
The 1.6 Multijet has 120 hp and 320 Nm from February 2016 to November 2020; the 1.3 Multijet has 95 hp and 200 Nm. On the petrol side, the 1.4 16V Fire makes 95 hp and 127 Nm, and the 1.6 E-torQ with automatic gearbox makes 110 hp and 152 Nm.
After the 2020 facelift
From November 2020 the Tipo gained the 1.0 FireFly Turbo with 100 hp, and the 1.6 Multijet rose from 120 to 130 hp. A 1.5 Hybrid with 130 hp followed in 2022. The 1.0 FireFly Turbo, the 130 hp 1.6 Multijet and the 1.5 Hybrid are not in the catalogue. In Germany the diesel share of new Tipos was 31% in 2016, 11% in 2018 and 2019, and 17% in 2021.
Fiat Tipo chip tuning: questions
Tipo 1.6 Multijet with 120 or 130 hp: which one is mine?
The 120 hp version covers cars built from 2016 to 2020; after the facelift the engine has 130 hp. It works with the GAN GT, which covers turbo engines and is rated at up to 30% more power.
Does Tipo chiptuning differ between the saloon, the hatchback, the Tipo SW and the Egea?
No: the Tipo (Typ 356) is one generation from 2015 in all body styles, so the choice follows the engine. The Egea is the same car under another name.
Tipo 1.4 16V with 95 hp and 1.6 E-torQ with 110 hp: what does the GAN GA+ offer?
Both work with the GAN GA+, which is rated at up to 12% more power. For both, the catalogue also gives up to 15% lower fuel consumption with an economical driving style.
Tuning box or ECU remap for the Fiat Tipo?
Your manufacturer's warranty is preserved: the ECU software is never changed, and the module can be removed at any time. Unlike an ECU remap, which rewrites the factory software, a tuning box sits between the engine sensors and the ECU and adjusts their signals. The module comes off in about a minute, and once it is removed no traces remain.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.