Chip Tuning Jeep Wrangler
Up to 30% more power for your Jeep Wrangler
The Jeep Wrangler (2007 →) is listed with 3 generations and 16 engines. For 4 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +30 to +56 hp (GAN GT from 399 EUR, GAN GTL from 249 EUR). For 12 naturally aspirated engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +14 to +38 hp (GAN GA+ from 189 EUR).
Which Jeep Wrangler do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Jeep Wrangler tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +56 hpwith the GAN GT on turbocharged engines
+30 to +56 hp across the Jeep Wrangler range with the GAN GT or GAN GTL.
- +38 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Jeep Wrangler engines: +14 to +38 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Jeep Wrangler chip tuning: engines and generations
Jeep Wrangler tuning: start with the diesel
The Wrangler JK's diesel is the VM Motori 2.8 CRD. It made 177 hp from April 2007 and 200 hp from February 2011, with 410 or 460 Nm depending on the version. Jeep Wrangler tuning with a tuning box covers both outputs, each with its own GAN GT figures.
The JL reached Europe in 2018 with a 2.0 turbo of 270 hp and 400 Nm; it works with the GAN GT too. The JL was also sold as a 200 hp 2.2 MultiJet diesel and later as the 4xe plug-in hybrid; the 2.2 MultiJet and the 4xe are not in the catalogue. The larger petrol engines of the TJ and JK, such as the 4.0 and the 3.6 V6, work with the GAN GA+, rated at up to 12% more power.
Jeep Wrangler chip tuning: questions
Jeep Wrangler 2.8 CRD chiptuning: what does the GAN GT add to the 177 hp?
For the 2.8 CRD with 177 hp and 410 Nm, the catalogue lists 227 hp and 517 Nm with the GAN GT. The 200 hp version with 460 Nm reaches 256 hp and 574 Nm, so keep the two outputs apart when you choose. These are the stated gains for this engine type, not a dyno reading of your car.
Wrangler Rubicon chip tuning: what fits the JK 3.6 Rubicon?
The JK 3.6 Rubicon is listed under its own name, 3.6i Rubicon, although the Rubicon is a trim level with the same Pentastar 3.6 V6 as the other 3.6 versions. Rated at 284 hp, it works with the GAN GA+.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.