Chip Tuning Peugeot 208
Up to 30% more power for your Peugeot 208
The 208 (2012 → 2019) is listed with 1 generation and 22 engines. For 18 turbo engines, choose the GAN GT or GAN GTL tuning module: the GAN GT adds +20 to +39 hp (GAN GT from 329 EUR, GAN GTL from 219 EUR). For 4 naturally aspirated engines, choose the GAN GA or GAN GA+: the GAN GA+ adds +8 to +14 hp (GAN GA+ from 189 EUR).
Which 208 do you have?
Start with the model year and chassis code. Within a generation, choose your engine by the power output in your vehicle documents.
Peugeot 208 tuning: what the GAN module does and doesn’t do
More power and torque without an ECU remap or replacing any parts. The tuning module only adjusts the engine sensor signals.
- Bluetoothsmartphone mode control
- 18 mappingsfine tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +39 hpwith the GAN GT on turbocharged engines
+20 to +39 hp across the Peugeot 208 range with the GAN GT or GAN GTL.
- +14 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Peugeot 208 engines: +8 to +14 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding delivery costs.
Peugeot 208 chip tuning: engines and generations
Peugeot 208 1.6 HDi tuning: updated in 2015
The Peugeot 208's 1.6 diesel comes in a lower and a higher output, and both were updated in early 2015. The e-HDi with 92 hp and 230 Nm became the BlueHDi with 99 hp and 254 Nm in March 2015, and from March 2018 it makes 102 hp and 250 Nm. The e-HDi with 114 hp and 270 Nm gave way to the BlueHDi with 120 hp and 300 Nm, a Euro 6 engine with AdBlue.
Because the Euro 6 BlueHDi has an SCR system, the year of the car matters when a tuning box is matched for 208 tuning. The smaller 1.4 HDi has 68 hp and 160 Nm and was built from April 2012 to March 2015. All the diesels work with the GAN GT.
Petrol: VTi, PureTech and THP
A 68 hp petrol came as the 1.0 VTi from 2012 to 2016 and as the 1.2 PureTech from 2016 to 2019. The 1.2 with 82 hp and 118 Nm was built from 2012 to 2019. The 1.6 VTi has 120 hp and 160 Nm and was built until May 2015. The VTi engines are naturally aspirated, so they are matched to the GAN GA+. The 1.2 PureTech 110 is a turbo engine with 205 Nm, built from January 2015 to March 2019.
The 1.6 THP made 156 hp in the first years and 165 hp in 2015. The GTi has 200 hp and 275 Nm, and the GTi by Peugeot Sport has 208 hp from October 2014. The GAN GT covers the turbo petrols. The 208 reached European dealers in April 2012, and the facelift followed in June 2015.
Peugeot 208 chip tuning: questions
Chip tuning on a 208 1.6 e-HDi 115: how much more power?
With the GAN GT the 114 hp diesel reaches 148 hp and 349 Nm. The GAN GT is rated at up to 30% more power; these are the stated gains for this engine type, not a dyno reading of your car.
208 GTi 200 or GTi by Peugeot Sport: which module?
The GTi with 200 hp and the GTi by Peugeot Sport with 208 hp both use the GAN GT.
Does the 1.2 PureTech need the GAN GT or the GAN GA+?
The 1.2 PureTech 110 is a turbo engine and works with the GAN GT, while the 82 hp engine is matched to the GAN GA+. On the 1.2 PureTech, the timing belt runs in oil and can break up even when the service intervals are kept, and its debris can block the oil passages. A tuning module does not replace a worn part: have the belt checked before fitting.
Chiptuning for a BlueHDi: does the factory software change?
The GAN module sits between the engine sensors and the ECU and adjusts their signals, so the factory software, checksums and flash counter stay untouched. The engine's factory protections remain active.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.